As a drummer, you love to play those crispy beats, but I don’t think so your neighbor would love it too. Therefore, knowing how to soundproof a room for drums become important to avoid any inconvenience for people around you.
Drum kits usually oscillate between 90-130 decibels, which is nearly equal to the noise produced by a Boeing 707. Yup, they are actually this loud.
In this guide, I will tell you the easiest way of soundproofing for drums so that you can play anytime you want without troubling your neighbors and housemates.
What Do You Expect By Soundproofing A Room For Drums?
So before knowing the actual methods let us look at what are your expectations
Soundproofing a drum room completely needs a lot of time, money, and labor. It includes rebuilding your walls, installing soundproof doors and windows, building a decoupling zone, etc.
You need experts to help you which will increase your overall budget. If you have a tight pocket, then you may look for cheap ways to soundproof a room for drums.
So let us dive into the ways through which you can build your own cheap soundproof drum room.
How To Build A Soundproof Room For Drums?
Step 1: Find Leaks And Seal Them
The first step in building a soundproof drum room asks to look for all the leaks in the room as they allow air to pass through it and the air is the obvious medium for sound to travel.
How To Find Leaks?
Flash your room from outside at night and look for all the spots from where the light enters your room. These spots are the potential leaks.
Common places where you can look for these leaks include door and window frames, edges of walls, electrical outlets, vents, and fans.
How To Seal The Leaks?
Now you have found all the leaks in your room and the next step is to seal them. You can use any of the below mentioned things to seal the leaks and cracks.
- Acoustic sealant: It is a rubber-like material that fits in empty spaces and even in tiny gaps using a caulk gun.
- Green Glue: It is a damping compound that converts the mechanical energy from sound into a small amount of heat.
- Foam tape: It is a medium-density foam tape used to fill gaps.
Step 2: Soundproof Your Doors And Windows
Filling the gaps of doors and windows alone is not enough as these are the major areas of your room that allow the sound to pass through it.
Most of the houses have hollow doors which help in the amplification of sound so adding density to your door will help you a lot to abate those annoying noises.
One way to do that is to screw a fiberglass pane to your door, which will deaden the sound vibrations before passing the door.
If fiberglass panes are pricey for you, then sticking a hardboard to your door with glue will also work great.
Besides this, there lies a gap between the door and the ground, which allows the sound to pass through it.
Placing a soundproof door sweep is a simple way to block the gap between your door and the ground.
Just like the doors, windows are a significant source of sound to travel. Old day homes have single pane windows which are not capable to block much sound.
You can replace these windows with double or triple pane windows. However, they are quite expensive to buy varying from 350 to 1000 dollars.
So if you don’t want to spend a lot of money on windows then hanging acoustic curtains is a cheap and efficient method. They are thick, multilayered curtains, designed to abate the noise passing through them.
Bored with those black curtains?
Don’t worry, there are a variety of acoustic curtains to choose from.
Step 3: Soundproof Your Floor
The floor lies in direct contact with the drums so it becomes the obvious pathway for sound to knock on the door of your neighbor.
So placing a rug underneath your drum will reduce the transfer of sound vibrations through your floor.
Placing a rug under your drum will help you reduce the noise, but to make it more efficient, you need to install carpets on your floor, which will work as an extra layer for your soundproofing purpose.
There are different carpets available on amazon which you can use to give your floor a pleasant look.
Step 4: Soundproof Your Walls
Drums sound too loud because the sound produced from them bounces back and forth through the hard surfaces of your walls, so if you can absorb that sound then your drum will sound much quieter than before.
One way to do that is to cover your walls with drum soundproofing panels known as acoustic foam panels. They are generally used in recording studios to reduce the noise and improve the overall sound quality of the vocalist.
If you don’t feel to cover every wall, covering even a single wall will also be very effective by a percentage of 25.
Like the curtains and the carpets, acoustic panels are also available with unique designs which you use to decorate your room with the help of your creative mind.
Sound Absorption Sheet
If you don’t want to use acoustic panels, then a sound absorbing sheet is a great alternative. They work exactly as acoustic panels. You can hang these sheets in your room which will reduce the echo effect of the sound.
You can also color up your walls with soundproof paint, why?
Soundproof paint is a thick paint with sound absorbing filter to reduce the amount of noise inside the room.
Soundproof paint alone will do all the work?
No, but combining it with the above methods will do the work for you.
Step 5: Select A Proper Location
If you haven’t set up your drum room yet, then selecting a location first is definitely needed.
Try to look for a place that is far from your living areas like the basement or rooms that don’t have many windows and open spaces. Soundproofing basement for drums is quite easy than soundproofing a living area.
Make sure that your room is not completely empty and have some furniture such as shelves, closet. Heavy furniture in the room prevents the bouncing of sound waves and thus reduces noise.
The room you’ll be using for practice is your choice but if you haven’t decided on it, then these factors will help you do that.
How Much Does It Cost To Soundproof A Drum Room?
The most obvious question that comes to your mind after reading the given methods is how much will it cost to soundproof my drum room.
The cost totally depends on how many things you want to use while soundproofing your drum room. If you wish to use all the things mentioned above in this article, then it will cost you around 2000 to 3000 dollars.
Is this expensive for you, if yes then I have already mentioned the alternatives for expensive items above in the article.
Conclusion On How To Soundproof A Room For Drums.
Following these steps will help you a lot to deal with unwanted noises and allow the drummer to play stress-free without having a concern about disturbing others. It’s not only useful for you but for your neighbors and housemate as well.
I hope this guide helped you to build a soundproof drum room and if you have questions on how to soundproof a drum room, then let me know in the comment box, I’ll try to get back to you as soon as possible.
Why do you need to soundproof a room for drum?
Drums generate a lot of noise which will trouble your neighbors and housemates. So, soundproofing your room will be very helpful to you as your neighbors will not be standing next to your door complaining about the noise from your house.
Why do some drummers play behind the glasses?
These glasses are known as drum shields. Drummers play behind these drum screens because it disallows the sound to pass through them and thus reduces the overall noise.
These are generally used in studios to prevent the sound of drums to reach the microphones of other instruments.
You can even make a homemade drum shield if you don’t want to buy one.
Which are more silent Acoustic or Electric drum set?
Electronic drum sets are usually quieter than acoustic drum sets, which is a reason many people prefer electronic drum sets over acoustic drum sets.
An electronic drum set sounds low and is compact, while an acoustic drum set makes a lot of noise which easily penetrates the surrounding walls.